Target

The SQ10 target has been designed for use in shooting clubs or shooting schools but also for individuals who want to enjoy their passion for shooting at home:

  • Both the target and its cover are tilted, meaning that the pellets fall directly into the pellet recovery bin (when you shoot at the target) or onto the ground (when you hit the cover by mistake) and therefore do not ricochet.
  • What is more, the SQ10 target is equipped with a distance simulator to allow individuals who only have 7, 8 or 9 meters of free space to train under real conditions.

Sport Quantum guarantees that all delivered products will be free from any physical and manufacturing defects under normal conditions of use and service for a period of two (2) years from the delivery date.

The FeedbaQ Application is compatible with most recent versions of Android (verison 5 or above). We supply a Control Tablet to ensure that the Application functions perfectly with the SQ10 target and that it is ready for use on delivery.

The FeedbaQ Application can therefore function on another device. However, we cannot guarantee either correct operation or updates to the Application if installed on another device.

The target corresponds to current ISSF specifications. However, these specifications are currently being redefined.

The SQ10 target was designed to fulfill your wishes and needs. It is therefore easy to change:

  • The level of the exercises and games (easy, intermediate, difficult)
  • The display mode used for impacts (standard or expert)
  • The number of shots per serie
  • The brightness of the screen / target
  • The color of the display contour (outside of the card)
  • The color of the card
  • Whether or not different areas are displayed
  • Whether or not impacts are displayed
  • Whether scores are displayed to 1/10th of a point or in whole points – this can be changed as you go along
  • Whether zooming is performed on the center of the target or the center of the grouping

It is also possible to simulate a distance other than 10 meters – smaller display for a closer target or larger display for a target that is further away. Distances between 7 and 14 meters are possible.

The computer chooses certain predefined rules (every day or between sessions) for offsetting the display slightly (a few pixels) so that the impacts from the shots are not always located in the same place.

It is important to note that this offset is limited to +/- 5 centimeters horizontally and vertically to respect the tolerances defined by the ISSF. Naturally, these offsets are taken into account when measuring the impact and therefore have no effect on the precision of the target. This process further extends the lifetime of the top plate.

The lifetime of the sensor plate is practically unlimited. The lifetime of a top plate is approximately 10,000 shots with a rifle or 50,000 shots with a pistol.

The precision of the impact location will remain unchanged. However, once the 10,000 rifle shots / 50,000 pistol shots have been reached, the display may become slightly blurred. It is then time to replace the top plate.

The SQ10 target has been designed to resist compressed-air pellets up to 7.5 joules.

It is important to note that both the target and the cover are resistant to these impacts. You can therefore let novice shooters train with these targets without any fear of deterioration!

Sport Quantum’s technology makes it possible to identify the location of impacts on the target with a precision greater than 125µm (micrometers), corresponding to 1/10th of a point for 10 meters air rifle disciplines, thus respecting the requirements for Olympic events and those of the ISSF.

Load More

Consumables

You can contact us (or, of course, the distributor from whom you purchased your target) to order a top plate. We will deliver this to you as quickly as possible. To optimise the use of the SQ10 target and save time, you can also order the “Starter Kit”, containing 2 top plates, 1 silicone-based lubricant and 1 cleaning spray.

Once the product has been delivered, it is an easy task to replace the top plate. To do this:

  • Remove the 2 top screws at the 2 top edges of the top plate you want to replace
  • Unscrew the 2 lower screws at the 2 lower edges of the top plate you want to replace
  • Replace the old top plate with the new top plate
  • Replace and re-tighten the 4 screws.

The wear of the top plate is seen in the form of impact marks which vary depending on the power of the employed weapon (therefore greater with a rifle than with a pistol). Once the 10,000 rifle shots / 50,000 pistol shots have been reached, the display may become slightly blurred. The measurement precision is not impaired but the visual quality is slightly deteriorated.

It is therefore a good idea to replace the top plate when the visual quality of the image of the target becomes inadequate. This judgement is therefore somewhat subjective.

The lifetime of a top plate is approximately 10,000 rifle shots or 50,000 pistol shots. Once this number of shots has been reached, the display can become slightly blurred. It is then necessary to replace the top plate, which currently costs about €35.

Only one part of the SQ10 target is a consumable. This is the top plate and only has to be replaced very rarely.

Load More

Ordering and installation

There are various options to suit different needs:

  • Starter kit: 2 top plates, 1 silicone-based lubricant and 1 cleaning spray
  • Supervisor’s station for managing competitions and training stations (SynQro)
  • Secure orientable base for tablet (due for future launch)
  • Base for target (due for future launch)

A 2-pages Startup Guide explaining the steps you need to take to start up the product is supplied with the SQ10 target. This guide is available in the “Downloads” section of our web site. If you do not have it, please do not hesitate to contact us. We will send you the most recent version of the complete User Manual in PDF format.

  • The SQ10 target
  • The polycarbonate cover
  • The Control tablet with the FeedbaQ Application and a power supply cable for the tablet / This tablet will connect automatically to the target via WiFi
  • A power supply cable for the target that is to be connected to the back of the target (at the top left when looking at the target from behind)
  • A bracket for fixing the target to the wall
  • Screws for fixing the bracket to the wall
  • Two pins (fixed to the target during transport) to make sure that the target does not fall off the bracket

Load More

Use

A User Manual indicating the recommendations for use and maintenance is supplied with the target. This User Manual will soon be available in the “Downloads” section of our web site. If you do not have it, please do not hesitate to contact us. We will send you the most recent version of the complete User Manual in PDF format.

The 10-meters SQ10 target is suitable for use with pellets (flat head) fired with compressed air weapons < 7.5 joules

The 25 to 50-meters SQ50 target is suitable for use with firearms < 1,000 joules

The target is supplied accompanied by an Update and Maintenance Guide containing the steps to follow during updates. This Update and Maintenance Guide will soon be available in the “Downloads” section of our web site. If you do not have it, please do not hesitate to contact us. We will send you the most recent version of the complete User Manual in PDF format.

Load More